Alltek Roofing installs synthetic roofing in Glen Ellyn, IL as a connected system of panels, airflow, and attic performance. Synthetic products like composite slate and shake copy the look of natural materials while weighing far less on your deck. We measure attic floor space and calculate airflow before picking a profile. That reading tells us how the roof will hold up across DuPage County seasons, not just how it looks from the curb.
Synthetic Roofing In Glen Ellyn, IL
We Size Your Intake And Exhaust Venting To The 1:150 Standard Before A Single Panel Goes Down
Lightweight Composite Panels Installed On Top Of An Attic We Measure First
Synthetic roofing in Glen Ellyn, IL gives you the look of slate or cedar shake without the weight those materials put on a frame. Composite panels resist cracking, shed water cleanly, and withstand Illinois wind and freeze-thaw cycles.
But the panel itself is only half the job. We start inside, in the attic, because airflow under the deck decides how any roof ages. Alltek Roofing measures your attic floor space, works out the net free airflow the space needs, then sizes intake and exhaust venting to match.
From there, we match a synthetic profile to that number and build the whole thing to the maker’s spec. You get a roof planned around performance, explained in plain terms, with every call backed by a measurement instead of a guess.
How We Build A Synthetic Roof In Glen Ellyn, IL
Our synthetic roof installation in DuPage County, IL follows a fixed sequence, and the attic reading we take first drives every step after it.
Read The Attic Before The Panel
Our first stop is your attic, not your roof. We measure the floor area and calculate the net free airflow the space requires under the 1:150 ratio. That figure sets everything that follows. Doing this up front means the synthetic panels we choose sit on a deck with airflow matched to it, which keeps heat and moisture from shortening the roof’s life.
Strip Down To Clean Wood
Next we tear off the old roofing and expose the bare decking. Synthetic panels are light, but they still need a sound, flat substrate to fasten into. We check the wood for rot, soft spots, and old water tracks while it’s open.
Finding bad decking now, before new material covers it, keeps a hidden weak spot from telegraphing up through your finished synthetic roof.
Balance Intake & Exhaust
Then we install intake venting low at the soffits and exhaust venting high at the ridge, sized to your attic’s airflow needs. Balanced ventilation moves fresh air in and hot, damp air out on a steady loop. That balance protects the deck under your synthetic panels and keeps attic moisture from building up through Illinois winters.
Lay Panels To The Maker’s Spec
Last, we install underlayment, starter course, synthetic field panels, and ridge detail in the order the manufacturer requires. We use the specified fastener count and placement, not a shortcut pattern.
Following the maker’s rules keeps your warranty intact and keeps panels locked down against wind coming off open Chicagoland ground.
Choosing Your Synthetic Roof In Glen Ellyn, IL
A few key decisions shape both how your roof looks from the street and how the system under it performs.
Picking A Synthetic Profile
Synthetic roofing panels in DuPage County, IL come in a few looks, mostly composite slate and composite shake. Slate profiles give you clean, uniform lines. Shake profiles bring a textured, wood-grain face.
Both weigh a fraction of the natural material they copy, so your frame carries less load. We’ll walk the options against your home’s style and your airflow number.
Correcting Airflow During The Install
If our attic measurement shows your current venting falls short of the 1:150 target, you decide whether we correct it while the roof is open. The deck is exposed, and the venting is accessible, so this is the cheapest moment to fix it. Proper ventilation under a synthetic roof keeps the deck dry and the panels performing for the long haul.
Why Choose Alltek Roofing For Synthetic Roofing In Glen Ellyn, IL
This is who we are, and it shapes the synthetic roof we build on your home.
- Ventilation Drives The Design. We treat synthetic roofing as airflow first, panel second. We calculate attic venting needs before quoting synthetic profiles so composite systems perform for the long term.
- Real Measurements, Not Rules Of Thumb. We size intake and exhaust to the 1:150 ratio using your attic’s actual square footage. Your synthetic roof gets custom ventilation scaled specifically to your home.
- You’ll Understand The Plan. We walk you through the attic numbers and explain every recommendation in plain language so you can evaluate options confidently without high-pressure sales pitch tactics.
- Root Causes, Not Cover-Ups. When we spot compromised decking or short venting, we address it directly. Installing synthetic panels over a wet attic hides a flaw that eventually causes premature system failure.
- Technical Pride In Every Build. Our team takes pride in mastering the mechanics behind synthetic composite systems. We solve complex ventilation challenges that other contractors bypass to ensure lasting structure performance.
What Homeowners Say About Alltek Roofing
Homeowners keep pointing to the same thing: we lead with measurements, lay out the reasoning, and follow the plan we described. Here’s what people have shared about working with our team.
My Roof, Gutters, Soffit And Fascia Look Great And The Team Did A Really Nice Job
I Went With Alltek Based On A Coworker’s Recommendation After A Bad Experience With The Last Roofer She Had Used
Our Roof Was Completely Fixed And The Staff Was Very Fast And Professional
Synthetic Roofing Questions From Glen Ellyn, IL Homeowners
Straight answers to what people ask us before committing to a synthetic roof.
Can synthetic panels go right over my old roof?
A: No, we tear off to the bare decking first. We need to inspect the wood and confirm it’s sound before fastening composite panels into it. Layering new material over an old roof hides problems and throws off the fastening the manufacturer requires. A clean tear-off lets us build the synthetic roof on a deck we’ve actually checked.
How long does a synthetic roof installation take?
A: Most standard homes are torn off and re-roofed in a few days, with timing driven by roof size, pitch, and weather. Synthetic panels install in a set order after the attic reading and decking check. We’ll give you a realistic window once we’ve walked your home and measured the attic.
How much does synthetic roofing cost in Glen Ellyn, IL?
A: Cost tracks the size and pitch of your roof, the synthetic profile you pick, and how much decking we replace once the old roof comes off. Correcting venting to the 1:150 standard is a separate line you approve. We don’t quote a number until we’ve measured your attic and seen the deck, because guessing before that wouldn’t be honest.
Is synthetic roofing a good fit for Chicagoland weather?
A: Yes. Synthetic panels handle Illinois freeze-thaw swings, summer heat, and wind off open Chicagoland ground well. Composite material flexes with temperature changes instead of cracking the way natural slate can. Paired with the balanced ventilation we build underneath, a synthetic roof holds up through the full range of local seasons.
What areas do you cover for synthetic roofing?
A: We install synthetic roofing across Glen Ellyn, IL and the surrounding DuPage County towns, including Glendale Heights, Carol Stream, and Elmhurst. Reach out through our team at Alltek Roofing and we’ll set up an attic measurement to start your project the right way.
What exactly is synthetic roofing?
A: Synthetic roofing uses engineered composite panels made to copy natural slate or cedar shake. The panels weigh far less than the real thing, so they put less strain on your frame. They resist cracking, curling, and granule loss, which gives you the premium look without the maintenance load of natural stone or wood.
Why do you measure the attic before choosing synthetic panels?
A: Because the attic decides how long the roof lasts. Airflow under the deck controls heat and moisture, and those two things age a roof from the inside. We measure the floor space, calculate the airflow it needs, then match a synthetic system to that figure. The panel on top is only as good as the system beneath it.
Schedule Your Free, In-Home Consultation
Are you searching for a proven roofing company in Chicagoland? Alltek Roofing offers exceptional roof replacement services, including asphalt shingles, composite roofing, and metal roofing options. Call us today for more information and to receive your free, no-obligation quote.
